Sony Dsch400 Power on and Off Again Error

EldoradoSA · Jul 26, 2019 one ane 10 0

I registered but to say Cheers

RememberThe5th · Jul 30, 2014 vii,000 172 37,640 1,230

Guys share!
Would likewise like to add, if its nether warranty, get replacement, this 1 I've got with no warranty cleaved.

Satafirm S11

Besides, WHY ON EARTH this app is not working when not connected to the internet??

RememberThe5th

I really practise not know, crusade the software isnt mine equally stated, try safe way or like or on older windows similar 7.
For me it worked fine. Subsequently i pressed Y and it worked.

Satafirm S11

I actually do non know, crusade the software isnt mine as stated, effort safe fashion or similar or on older windows like vii.
For me information technology worked fine. Subsequently i pressed Y and it worked.

How long did it take?

RememberThe5th

30s i guess? I do not recollect tho.

douglasheldpacito

dosen't work for me

Phison S11 SSD repair from protect fashion utility v0.111a past vlo
Utilize: repairS11 drive_num[y]
y - disable any requests to user

0: (WDC WD5000AAKX-00U6AA0
ane: (ST500DM002-1BD142
2: (SATAFIRM S11
Please select drive number:2

Bulldoze: 2(ATA)
Model:
Fw :
Size : 0 MB
ATA: ReadInfoBlock failed! Mistake: 0x21
Press any central to exit

vbmluis · Jan 4, 2020 1 0 10 0

Hullo at that place, just registered to say thank you for the possible solution, oasis't tried myself and don´t desire to try until some questions, equally my information is more valuable than the SSD itself, so my question is for those who sucefully recovered the drive, is the data still ok?

Shark.93

Hello, I accept a Kingston A400 240GB [SA400S37/240G, native firmware on label: SBFK71B1] with the infamous SATAFIRM S11 trouble, happened terminal week subsequently i,5 years of usage. I take backups of my data, so what I am looking for is to restore the health of the bulldoze in order to continue using it; I don't care if the information is wiped in the process: I am prepared to reinstall the OS.

I have tried running repairS11 utility past vlo (vlo.name): when using a SATA-to-USB adapter phison_flash_id detects PS3108 Controller so the repair utility refuses to run; when using built-in SATA port on my Laptop (AHCI mode set in BIOS) the detected Controller is PS3111, the repair utility ends correctly with a success message, but the problem remains. What else can I do?

By any take a chance has anyone tried using PhisonToolBox v1.17 past usbdev.ru? By all means I just want to exit from 'Rubber Mode' country, restore 'Set up' country of the drive and simply reinstall my operating system over it, I do non care about the data because I have backups.

Another user claimed he restored the aforementioned drive model using SBFKB1C3.zip (media.kingston.com) and s11-flasher 2.0 (vlo.name). Does this actually give a new life to the SSD (even if information technology erases the data) and will information technology void the remaining warranty of the unit?

skywyw · Jan 23, 2020 one 0 x 0

Hullo, I have a Kingston A400 240GB [SA400S37/240G, native firmware on characterization: SBFK71B1] with the infamous SATAFIRM S11 problem, happened last week after 1,v years of usage. I have backups of my information, and so what I am looking for is to restore the health of the drive in guild to keep using information technology; I don't care if the information is wiped in the process: I am prepared to reinstall the OS.
I have tried running repairS11 utility past vlo (vlo.proper noun): when using a SATA-to-USB adapter phison_flash_id detects PS3108 Controller so the repair utility refuses to run; when using built-in SATA port on my Laptop (AHCI mode set in BIOS) the detected Controller is PS3111, the repair utility ends correctly with a success message, just the trouble remains. What else can I practice?

By any take chances has anyone tried using PhisonToolBox v1.17 by usbdev.ru? By all means I merely want to exit from 'Safety Mode' state, restore 'Ready' land of the drive and just reinstall my operating system over it, I do non care about the data because I have backups.

Another user claimed he restored the aforementioned bulldoze model using SBFKB1C3.zip (media.kingston.com) and s11-flasher 2.0 (vlo.proper name). Does this actually give a new life to the SSD (fifty-fifty if information technology erases the information) and volition it void the remaining warranty of the unit?

Hither is how i got it fixedup , for some reason Windows 10 broke the drive i formated information technology under Linux and information technology started showing 120gb statafirm. i downloaded Phison S11 firmware flasher v2 and Phison S12 flash id
from here http://vlo.name:3000/ssdtool/ and the firmwares from here http://www.usbdev.ru/?wpfb_dl=6583 .
Yous demand flasher id to check your firmwarevarsion and the memory if it is micron or toshiba.
When you encounter them you can unzip the fw goose egg discover yours name it fw.bin and put it in the same directory as Phison S11 flasher , run i of the ii bin files toshiba or micron depending on your retentivity , information technology volition make fw.exe to exist able to run now .
Run it update the firmware , restart the pc and you shoud be able to run into your ssd again
mine was kingston A400 120g

bastler01 · Jan 24, 2020 1 0 10 0

And then i tried different versions of the s11 flasher and once it said it worked, but later restarting the pc the problem occured again.
Then I tried the fashion skywyw wrote, i tried the s12 flash id and this is what happened:

                              v0.11a Drive: 1(ATA) OS: x.0 build 18362 Model: SATAFIRM   S11                        Fw   : SBFK71W1 Size : 228936 MB ATA: ReadF4 failed, Error: 0x51! ATA: S12Cmd[i][80] - Write failed, Error: 0x51! Phison PS3112 not detected - Leave!

EDIT: The SSD besides tin´t be found by the Kingston SSD Manager.

popatim

Hello, I have a Kingston A400 240GB [SA400S37/240G, native firmware on characterization: SBFK71B1] with the infamous SATAFIRM S11 trouble, happened last week after ane,five years of usage. I have backups of my information, and so what I am looking for is to restore the health of the drive in society to continue using it; I don't care if the data is wiped in the procedure: I am prepared to reinstall the Os.

Information technology has a iii yr warranty. I'd suggest taking advantage of it.

Shark.93

Yes, I take posted in other forums and vlo himself told me (past looking at the phison_flash_id.txt file) that the "number of defects" on my drive is already at the limit for a 240GB SSD (he refers to "Defects All (per aeroplane) Early on Later on" inside the file); so I guess in the finish I volition mitt it over. Nevertheless, has anyone tried Secure Erase, possibly through Linux? It is said to accept worked some times.

toyotavan · Jul 25, 2019 fifteen 0 ten 0

dosen't work for me
Phison S11 SSD repair from protect mode utility v0.111a past vlo
Utilize: repairS11 drive_num[y]
y - disable any requests to user

0: (WDC WD5000AAKX-00U6AA0
1: (ST500DM002-1BD142
2: (SATAFIRM S11
Delight select bulldoze number:2

Drive: 2(ATA)
Model:
Fw :
Size : 0 MB
ATA: ReadInfoBlock failed! Fault: 0x21
Press any cardinal to exit

Same problem, Any take chances you got it working?

Shark.93

@toyotavan I am not sure if this is a solution to your specific error with the repair utility, and let me tell you upfront that I got a new replacement unit complimentary of charge past Kingston's RMA Squad without even needing to ship my defective unit.

That being said, later 3 months somebody on a Brazilian Forum has found a working solution for this problem. [source]

I as well took this SATAFIRM S11 BO with Kingston SA400S37. I had that in two at once, one 120gb and another 240gb. In both I tried to use the programs that are bachelor on the sites mentioned by members to a higher place, I tried all the style ... Information technology didn't work ... I managed to solve it every bit follows ...

Notation: It is recommended to do the procedure on windows installed in AHCI way! You MUST perform the procedure with the SSD plugged into a SATA connexion, in USB mode it will not work!

1 - Download these two files, ane of the files has all the firmware available on the usbdev website, the other file is a program to generate the executable that will make the update:
* s11-flasher - http://vlo.name:3000/tmph/s11-flasher.rar
* firmware_ps3111 - http://http//www.usbdev.ru/?wpfb_dl=6583

2 - Excerpt the folders.
iii - Inside the "firmware_ps3111" folder, search for the firmware corresponding to your SSD or the closest ane you lot have, copy this file and paste it in the "s11-flasher" folder, then y'all must rename the firmware to (fw.BIN). [for example if the label on the SSD reads "SBFK71B1", then the firmware that y'all must pick is "SBFK71F1"]

4 - Run "s11-flasher2-micron.cmd" WIHTOUT administrator privileges: information technology will generate the executable fw.exe.
5 - You can connect the SSD directly inside the Laptop, perchance through the CD bay or another SATA free interface. It is non recommended to endeavour Hirens Boot but yous can try; remember that AHCI must be enabled in the BIOS. Information technology is likewise strongly not recommended to use SATA to USB adaptors considering the procedure may fail: utilise a SATA interface.

half-dozen - Run the file fw.exe (this 1 WITH administrator privileges) and information technology will write the firmware on the SSD, so you have to select the device that is marked as SATAFIRM S11, click on Upgrade Firmware and wait ... It is recommended before doing this stride that all applications are airtight and the Antivirus is turned off.

7 - When finished, you must perform a power cycle of the SSD ("disconnect SATA power cable only, not data"), wait 5 seconds and turn it on again (this with the PC turned on), subsequently turning on the SSD, restart the estimator to recognize the SSD.
8 - Go to Disk Direction, probably opening this part of Computer Direction will already enquire you to inizialize the disk, click to inizialize it and after that, create the sectionalization in the desired format.

If you need help I did a video trying to explain besides:

https://www.youtube.com/sentinel?v=bgy6VNC9fcw

toyotavan · Jul 25, 2019 fifteen 0 10 0

Cheers! That'southward the closest I've come up to fixing that drive. I don't think any of the firmwares work (I take a generic drive branded Inland) and it gets stuck at 15 percent. I can check the error codes, merely I think I'g just going to purchase a samsung drive because they are reliable. Just cheers again for the help!

Thread starter	Like threads	Forum	Replies	Date
H	Question WD Blackness SN850 vs Kingston KC3000 ?	Storage	1	Mar xi, 2022
Z	[SOLVED] Kioxia Exceria vs Kingston A2000 as primary bulldoze	Storage	iii	Jan 16, 2022
	Question Kingston SSD ofttimes disconnecting?	Storage	6	Jan 15, 2022
A	Question WD Blueish SN550 1TB vs Kingston A2000 1TB (equally secondary drive)	Storage	3	January 5, 2022
D	Question Upgraded my CPU, but at present my M.two NVMe SSD isn't detected past my motherboard anymore	Storage	3	December 6, 2021
	[SOLVED] So I Bought Kingston A400 To Gear up GTA V Load Map Issue	Storage	2	Nov 12, 2021
Chiliad	Question Reckoner randomly beeing slower than usual, especially just after kick	Storage	2	Sep 10, 2021
East	[SOLVED] Kingston A2000 Wellness	Storage	5	Sep 2, 2021
	[SOLVED] Assistance me choose between Kingston Q500 vs WD Light-green vs Crucial BX500.	Storage	6	Aug 23, 2021
1000	Question Kingston SSDs recognized intermittently	Storage	3	Jul 15, 2021

Old Beded1966

Sony Dsch400 Power on and Off Again Error

Menu Halaman Statis